dmesg - AArch64 rev 4
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.10.65 (orange@orange-All-Series) (gcc version 4.9.3 20150113 (prerelease) (Linaro GCC 4.9-2015.01-3) ) #55 SMP PREEMPT Fri Nov 18 16:17:28 CST 2016
CPU: AArch64 Processor [410fd034] revision 4
Machine: sun50iw2
cma: CMA: reserved 16 MiB at 7f000000
On node 0 totalpages: 262144
DMA zone: 3584 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 262144 pages, LIFO batch:31
psci: probing for conduit method from DT.
psci: PSCIv0.2 detected in firmware.
psci: Using standard PSCI v0.2 function IDs
PERCPU: Embedded 12 pages/cpu @ffffffc03ef95000 s20224 r8192 d20736 u49152
pcpu-alloc: s20224 r8192 d20736 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 258560
Kernel command line: console=tty0 console=ttyS0,115200n8 no_console_suspend earlycon=uart,mmio32,0x01c28000 mac_addr=2a:13:a5:03:a0:06 root=/dev/mmcblk0p2 ro rootwait
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Memory: 1024MB = 1024MB total
Memory: 985196k/985196k available, 63380k reserved
Virtual kernel memory layout:
vmalloc : 0xffffff8000000000 - 0xffffffbbffff0000 (245759 MB)
vmemmap : 0xffffffbc00e00000 - 0xffffffbc01c00000 ( 14 MB)
modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
memory : 0xffffffc000000000 - 0xffffffc040000000 ( 1024 MB)
.init : 0xffffffc000ad0000 - 0xffffffc000b59f00 ( 552 kB)
.text : 0xffffffc000080000 - 0xffffffc000acf6f4 ( 10558 kB)
.data : 0xffffffc000b5a000 - 0xffffffc000c22a48 ( 803 kB)
Preemptible hierarchical RCU implementation.
NR_IRQS:64 nr_irqs:64 0
Architected cp15 timer(s) running at 24.00MHz (virt).
Console: colour dummy device 80x25
console [tty0] enabled
Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Mount-cache hash table entries: 256
Initializing cgroup subsys debug
Initializing cgroup subsys freezer
ftrace: allocating 28417 entries in 112 pages
CPU0: update cpu_power 1024
hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 7 counters available
virtual base = 0xffffff800000a000.
gicd_base = 0xffffff800000c000.
gicc_base = 0xffffff800000e000.
CPU1: Booted secondary processor
CPU1: update cpu_power 1024
CPU2: Booted secondary processor
CPU2: update cpu_power 1024
CPU3: Booted secondary processor
CPU3: update cpu_power 1024
Brought up 4 CPUs
SMP: Total of 4 processors activated (192.00 BogoMIPS).
devtmpfs: initialized
atomic64 test passed
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
dump_class_init,839, success
vdso: 2 pages (1 code, 1 data) at base ffffffc000b69000
hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
software IO TLB [mem 0x7d000000-0x7d400000] (4MB) mapped at [ffffffc03d000000-ffffffc03d3fffff]
DMA: preallocated 256 KiB pool for atomic allocations
pll_audio-set_default_rate=24576000 success!
pll_video-set_default_rate=297000000 success!
pll_ve-set_default_rate=420000000 success!
pll_de-set_default_rate=864000000 success!
ahb1-set_default_rate=200000000 success!
de-set_default_source=pll_de success!
de-set_default_rate=432000000 success!
tcon0-set_default_source=pll_video success!
tve-set_default_source=pll_de success!
hdmi-set_default_source=pll_video success!
sun50iw2p1-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver
sun50iw2p1-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
sunxi hwspinlock vbase:0xffffff800005c000
bio: create slab at 0
pwm module init!
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Linux video capture interface: v2.00
[ARISC] :sunxi-arisc driver v1.20
[ARISC] :sunxi-arisc driver v1.20 startup succeeded
Advanced Linux Sound Architecture Driver Initialized.
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
cfg80211: Calling CRDA to update world regulatory domain
[pm]aw_pm_init!
np name = /soc@01c00000/rtc@01f00000.
base = ffffff800006c100, len = 4.
pmu name: pmic0 .
Warning: can not find np for pmic0.
pmu name: pmic1 .
Warning: can not find np for pmic1.
add_sys_pwr_dm: get ldo name for id: vcc-lpddr failed
add_sys_pwr_dm: get ldo name for id: vcc-pl failed
add_sys_pwr_dm: axpdummy_ldo6 ldo already alwayson.
add_sys_pwr_dm: vcc-pc not sys id.
after inited: sys_mask config = 0x4855.
Warning: can not find np for dynamic_standby_para.
[pm]valid
[pm]valid
Notice: sun9i & sun8iw5 & sun50i not need support normal standby, change to super standby.
[DISP]disp_module_init
[DISP] init_disp:0x20b0000
[DISP] boot_disp:0x404
[DISP] fb_base:0x0
[DISP] Fb_copy_boot_fb,line:959:no boot_fb0
[DISP]disp_module_init finish
sunxi budget cooling probe start !
CPU freq cooling register Success
CPU hotplug cooling register Success
CPU budget cooling register Success
input: sunxi-ths as /devices/virtual/input/input0
thermal thermal_zone0: failed to read out thermal zone 0
Switching to clocksource arch_sys_counter
FS-Cache: Loaded
CacheFiles: Loaded
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 5, 131072 bytes)
TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Unpacking initramfs...
Freeing initrd memory: 1064K (ffffffc036d85000 - ffffffc036e8f000)
lock super standby defaultly!
lookup_scene_lock_name: new scene lock super_standby
scene_lock_init name=super_standby
scene_lock: super_standby, type 5, count 1
audit: initializing netlink socket (disabled)
type=2000 audit(0.330:1): initialized
FS-Cache: Netfs 'nfs' registered for caching
FS-Cache: Netfs 'cifs' registered for caching
NTFS driver 2.1.30 [Flags: R/W].
fuse init (API version 7.22)
msgmni has been set to 1958
SELinux: Registering netfilter hooks
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
sunxi_bootup_extend_probe: bootup extend state 1
bootup extend probe ok
failed to get easy_light_used assign
failed to get standby led pin assign
gpio_pin_1(362) gpio_is_valid
gpio_pin_2(20) gpio_is_valid
gpio name is PL10, ret = 0
gpio name is PA20, ret = 0
gpio_init finish with uesd
uart0: ttyS0 at MMIO 0x1c28000 (irq = 32) is a SUNXI
sw_console_setup()1268 - console setup baud 115200 parity n bits 8, flow n
console [ttyS0] enabled
uart1: ttyS1 at MMIO 0x1c28400 (irq = 33) is a SUNXI
uart2: ttyS2 at MMIO 0x1c28800 (irq = 34) is a SUNXI
misc dump reg init
loop: module loaded
Get boot type cmd line fail
spi spi0: master is unqueued, this is deprecated
spi spi1: master is unqueued, this is deprecated
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
PPTP driver version 0.8.5
usbcore: registered new interface driver hso
usbcore: registered new interface driver asix
usbcore: registered new interface driver ax88179_178a
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver net1080
usbcore: registered new interface driver cdc_subset
usbcore: registered new interface driver zaurus
usbcore: registered new interface driver cdc_ncm
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
get ehci0-controller, regulator_io is no nocare
[sunxi-ehci0]: probe, pdev->name: 1c1a000.ehci0-controller, sunxi_ehci: 0xffffffc000d183e0, 0x:ffffff8000b36000, irq_no:68
sunxi-ehci 1c1a000.ehci0-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
sunxi-ehci 1c1a000.ehci0-controller: new USB bus registered, assigned bus number 1
sunxi-ehci 1c1a000.ehci0-controller: irq 104, io mem 0xffffffc00047a564
sunxi-ehci 1c1a000.ehci0-controller: USB 0.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
usb usb1: Manufacturer: Linux 3.10.65 ehci_hcd
usb usb1: SerialNumber: sunxi-ehci
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
get drv_vbus is fail, 84
get ehci1-controller, regulator_io is no nocare
[sunxi-ehci1]: probe, pdev->name: 1c1b000.ehci1-controller, sunxi_ehci: 0xffffffc000d18660, 0x:ffffff8000b3c000, irq_no:6a
sunxi-ehci 1c1b000.ehci1-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
sunxi-ehci 1c1b000.ehci1-controller: new USB bus registered, assigned bus number 2
sunxi-ehci 1c1b000.ehci1-controller: irq 106, io mem 0xffffffc00047a564
sunxi-ehci 1c1b000.ehci1-controller: USB 0.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
usb usb2: Manufacturer: Linux 3.10.65 ehci_hcd
usb usb2: SerialNumber: sunxi-ehci
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
get drv_vbus is fail, 84
get ehci2-controller, regulator_io is no nocare
[sunxi-ehci2]: probe, pdev->name: 1c1c000.ehci2-controller, sunxi_ehci: 0xffffffc000d188e0, 0x:ffffff8000b44000, irq_no:6c
sunxi-ehci 1c1c000.ehci2-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
sunxi-ehci 1c1c000.ehci2-controller: new USB bus registered, assigned bus number 3
sunxi-ehci 1c1c000.ehci2-controller: irq 108, io mem 0xffffffc00047a564
sunxi-ehci 1c1c000.ehci2-controller: USB 0.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
usb usb3: Manufacturer: Linux 3.10.65 ehci_hcd
usb usb3: SerialNumber: sunxi-ehci
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
get drv_vbus is fail, 84
get ehci3-controller, regulator_io is no nocare
[sunxi-ehci3]: probe, pdev->name: 1c1d000.ehci3-controller, sunxi_ehci: 0xffffffc000d18b60, 0x:ffffff8000b4c000, irq_no:6e
sunxi-ehci 1c1d000.ehci3-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
sunxi-ehci 1c1d000.ehci3-controller: new USB bus registered, assigned bus number 4
sunxi-ehci 1c1d000.ehci3-controller: irq 110, io mem 0xffffffc00047a564
sunxi-ehci 1c1d000.ehci3-controller: USB 0.0 started, EHCI 1.00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
usb usb4: Manufacturer: Linux 3.10.65 ehci_hcd
usb usb4: SerialNumber: sunxi-ehci
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
get ohci0-controller, regulator_io is no nocare
hci: request ohci0-controller gpio:354
ohci0-controller get usb clk_usbohci12m clk failed.
ohci0-controller get usb clk_hoscx2 clk failed.
ohci0-controller get usb clk_hosc failed.
ohci0-controller get usb clk_losc clk failed.
[sunxi-ohci0]: probe, pdev->name: 1c1a000.ohci0-controller, sunxi_ohci: 0xffffffc000d179e0
sunxi-ohci 1c1a000.ohci0-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver
sunxi-ohci 1c1a000.ohci0-controller: new USB bus registered, assigned bus number 5
sunxi-ohci 1c1a000.ohci0-controller: irq 105, io mem 0x76b076c07630720
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver
usb usb5: Manufacturer: Linux 3.10.65 ohci_hcd
usb usb5: SerialNumber: sunxi-ohci
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 1 port detected
get drv_vbus is fail, 84
get ohci1-controller, regulator_io is no nocare
ohci1-controller get usb clk_usbohci12m clk failed.
ohci1-controller get usb clk_hoscx2 clk failed.
ohci1-controller get usb clk_hosc failed.
ohci1-controller get usb clk_losc clk failed.
[sunxi-ohci1]: probe, pdev->name: 1c1b000.ohci1-controller, sunxi_ohci: 0xffffffc000d17c60
sunxi-ohci 1c1b000.ohci1-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver
sunxi-ohci 1c1b000.ohci1-controller: new USB bus registered, assigned bus number 6
sunxi-ohci 1c1b000.ohci1-controller: irq 107, io mem 0x76b076c07630720
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver
usb usb6: Manufacturer: Linux 3.10.65 ohci_hcd
usb usb6: SerialNumber: sunxi-ohci
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 1 port detected
get drv_vbus is fail, 84
get ohci2-controller, regulator_io is no nocare
ohci2-controller get usb clk_usbohci12m clk failed.
ohci2-controller get usb clk_hoscx2 clk failed.
ohci2-controller get usb clk_hosc failed.
ohci2-controller get usb clk_losc clk failed.
[sunxi-ohci2]: probe, pdev->name: 1c1c000.ohci2-controller, sunxi_ohci: 0xffffffc000d17ee0
sunxi-ohci 1c1c000.ohci2-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver
sunxi-ohci 1c1c000.ohci2-controller: new USB bus registered, assigned bus number 7
sunxi-ohci 1c1c000.ohci2-controller: irq 109, io mem 0x76b076c07630720
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver
usb usb7: Manufacturer: Linux 3.10.65 ohci_hcd
usb usb7: SerialNumber: sunxi-ohci
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 1 port detected
get drv_vbus is fail, 84
get ohci3-controller, regulator_io is no nocare
ohci3-controller get usb clk_usbohci12m clk failed.
ohci3-controller get usb clk_hoscx2 clk failed.
ohci3-controller get usb clk_hosc failed.
ohci3-controller get usb clk_losc clk failed.
[sunxi-ohci3]: probe, pdev->name: 1c1d000.ohci3-controller, sunxi_ohci: 0xffffffc000d18160
sunxi-ohci 1c1d000.ohci3-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver
sunxi-ohci 1c1d000.ohci3-controller: new USB bus registered, assigned bus number 8
sunxi-ohci 1c1d000.ohci3-controller: irq 111, io mem 0x76b076c07630720
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver
usb usb8: Manufacturer: Linux 3.10.65 ohci_hcd
usb usb8: SerialNumber: sunxi-ohci
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 1 port detected
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver ums-alauda
usbcore: registered new interface driver ums-cypress
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums_eneub6250
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-isd200
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-karma
usbcore: registered new interface driver ums-onetouch
usbcore: registered new interface driver ums-realtek
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
usbcore: registered new interface driver ums-usbat
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver option
mousedev: PS/2 mouse device common for all mice
usbcore: registered new interface driver xpad
usbcore: registered new interface driver usb_acecad
usbcore: registered new interface driver aiptek
usbcore: registered new interface driver gtco
usbcore: registered new interface driver hanwang
usbcore: registered new interface driver kbtab
usbcore: registered new interface driver wacom
Set vaild hardware RTC date 2016-01-01
sunxi-rtc 1f00000.rtc: rtc core: registered sunxi-rtc as rtc0
sunxi-rtc 1f00000.rtc: RTC enabled
IR NEC protocol handler initialized
IR RC5(x) protocol handler initialized
IR RC6 protocol handler initialized
IR JVC protocol handler initialized
IR Sony protocol handler initialized
IR RC5 (streamzap) protocol handler initialized
IR SANYO protocol handler initialized
IR MCE Keyboard/mouse protocol handler initialized
sunxi cedar version 0.1
[cedar]: install start!!!
cedar_ve: cedar-ve the get irq is 90
[cedar]: install end!!!
sunxi gpu cooling probe start !
CPU gpu cooling register Success
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
Bluetooth: HCI UART driver ver 2.2
Bluetooth: HCI H4 protocol initialized
Bluetooth: HCI Realtek H5 protocol initialized
rtk_btcoex: rtk_uart_coex_init, version: 1.1
rtk_btcoex: create workqueue
cpuidle: using governor ladder
cpuidle: using governor menu
sunxi-mmc 1c0f000.sdmmc: SD/MMC/SDIO Host Controller Driver(v0.54 2016-05-11 21:04) Compiled in Nov 18 2016 at 16:16:31
sunxi-mmc 1c0f000.sdmmc: regulator prop vmmc,str vcc-sdcv
sunxi-mmc 1c0f000.sdmmc: regulator prop vqmmc,str vcc-sdcvq33
sunxi-mmc 1c0f000.sdmmc: regulator prop vdmmc,str vcc-sdcvd
sunxi-mmc 1c0f000.sdmmc: No vmmc regulator found
sunxi-mmc 1c0f000.sdmmc: No vqmmc regulator found
sunxi-mmc 1c0f000.sdmmc: No vdmmc regulator found
sunxi-mmc 1c0f000.sdmmc: Got CD GPIO #166.
sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
sunxi-mmc 1c0f000.sdmmc: base:0xffffff8000b6c000 irq:92
sunxi-mmc 1c0f000.sdmmc: smc 0 p0 err, cmd 52, RTO !!
sunxi-mmc 1c0f000.sdmmc: smc 0 p0 err, cmd 52, RTO !!
sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
hidraw: raw HID events driver (C) Jiri Kosina
sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
zram: Created 1 device(s) ...
ashmem: initialized
sunxi-mmc 1c0f000.sdmmc: smc 0 p0 err, cmd 5, RTO !!
sunxi-mmc 1c0f000.sdmmc: smc 0 p0 err, cmd 5, RTO !!
sunxi-mmc 1c0f000.sdmmc: smc 0 p0 err, cmd 5, RTO !!
sunxi-mmc 1c0f000.sdmmc: smc 0 p0 err, cmd 5, RTO !!
sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 16 width 1 timing LEGACY(SDR12) dt B
sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 16 width 1 timing LEGACY(SDR12) dt B
sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 16 width 1 timing LEGACY(SDR12) dt B
logger: created 256K log 'log_main'
logger: created 256K log 'log_events'
mmc0: host does not support reading read-only switch. assuming write-enable.
sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 16 width 1 timing SD-HS(SDR25) dt B
sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 50000000Hz bm PP pm ON vdd 16 width 1 timing SD-HS(SDR25) dt B
sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 50000000Hz bm PP pm ON vdd 16 width 4 timing SD-HS(SDR25) dt B
mmc0: new high speed SDHC card at address aaaa
logger: created 256K log 'log_radio'
mmcblk0: mmc0:aaaa SL16G 14.8 GiB
logger: created 256K log 'log_system'
AUDIO :get regulator name failed .
sunxi-codec-machine sound.6: sun50iw2codec 1c22c00.cpudai0-controller mapping ok
mmcblk0: p1 p2
sndhdmi sound.7: sndhdmi 1c22800.daudio mapping ok
u32 classifier
Actions configured
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (7833 buckets, 31332 max)
ctnetlink v0.93: registering with nfnetlink.
NF_TPROXY: Transparent proxy support initialized, version 4.1.0
NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
xt_time: kernel timezone is -0000
ipip: IPv4 over IPv4 tunneling driver
gre: GRE over IPv4 demultiplexor driver
ip_gre: GRE over IPv4 tunneling driver
ip_tables: (C) 2000-2006 Netfilter Core Team
arp_tables: (C) 2002 David S. Miller
TCP: bic registered
TCP: cubic registered
TCP: westwood registered
TCP: htcp registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
mip6: Mobile IPv6
ip6_tables: (C) 2000-2006 Netfilter Core Team
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
NET: Registered protocol family 15
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Bluetooth: HIDP socket layer initialized
Registering SWP/SWPB emulation handler
[DISP] boot_disp:0x404
[HDMI] cec support = 1
[DISP] disp_device_attached,line:101:attched ok, mgr0device0, type=4
there is no tve dac(0) offset value.
[DISP] boot_disp:0x404
[DISP] disp_init_tv,line:641:screen 0 don't support TV!
usb_serial_number:20080411
file system registered
android_usb gadget: Mass Storage Function, version: 2009/09/11
android_usb gadget: Number of LUNs=3
lun0: LUN: removable file: (no medium)
lun1: LUN: removable file: (no medium)
lun2: LUN: removable file: (no medium)
android_usb gadget: android_usb ready
sunxi-rtc 1f00000.rtc: setting system clock to 2016-01-01 00:00:08 UTC (1451606408)
ALSA device list:
#0: audiocodec
#1: sndhdmi
Freeing unused kernel memory: 548K (ffffffc000ad0000 - ffffffc000b59000)
EXT2-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (244)
EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (mmcblk0p2): recovery complete
EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: systemd 232 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture arm64.
systemd[1]: Set hostname to .
systemd[1]: Reached target Remote File Systems.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Reached target Swap.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on Process Core Dump Socket.
systemd[1]: Listening on Network Service Netlink Socket.
systemd[1]: Listening on LVM2 metadata daemon socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Created slice System Slice.
systemd[1]: Created slice system-serial\x2dgetty.slice.
systemd[1]: Starting Journal Service...
systemd[1]: Created slice system-getty.slice.
systemd[1]: Mounting Debug File System...
systemd-journald[1061]: File /var/log/journal/9d294af102ac4a1295e6d22577418a0b/system.journal corrupted or uncleanly shut down, renaming and replacing.
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Reached target Paths.
systemd[1]: Mounting Temporary Directory...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Reached target Slices.
systemd[1]: Mounted Debug File System.
systemd[1]: Mounted Temporary Directory.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Started Journal Service.
EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[VFE]cci probe end cci_sel = 0!
[VFE]cci_init end
[VFE]Welcome to Video Front End driver
[VFE]csi0 probe end!
[VFE]csi_init end
[ISP] isp platform_id = 3!
systemd-journald[1061]: Received request to flush runtime journal from PID 1
[VFE]isp0 probe end!
[VFE]sunxi_isp_platform_register end
[VFE]mipi_init end
[VFE]flash_init end
[VFE]pdev->id = 0
[VFE]dev->cci_sel = 0
[VFE]dev->csi_sel = 0
[VFE]dev->mipi_sel = 0
[VFE]dev->isp_sel = 0
[VFE_WARN]fetch csi0_dev0_twi_id from device_tree failed
[VFE_WARN]fetch csi0_dev0_iovdd from device_tree failed
[VFE_WARN]fetch csi0_dev0_avdd from device_tree failed
[VFE_WARN]fetch csi0_dev0_dvdd from device_tree failed
[VFE_WARN]fetch csi0_dev0_afvdd from device_tree failed
[VFE_WARN]fetch csi0_dev0_flash_en from device_tree failed
[VFE_WARN]fetch csi0_dev0_flash_mode from device_tree failed
[VFE_WARN]fetch csi0_dev0_flvdd from device_tree failed
[VFE_WARN]fetch csi0_dev0_flvdd_vol from device_tree failed
[VFE_WARN]fetch csi0_dev0_af_pwdn from device_tree failed
[VFE]probe_work_handle start!
[VFE]vfe_runtime_resume
[VFE]vfe_init end
[VFE]..........................vfe clk open!.......................
[VFE]v4l2 subdev register input_num = 0
[VFE]vfe sensor detect start! input_num = 0
[VFE]Find sensor name is "gc2035", i2c address is 78, type is "YUV" !
[VFE]Sub device register "gc2035" i2c_addr = 0x78 start!
[VFE]v4l2_device_register_subdev return 0
[VFE]registered sensor subdev is OK!
[VFE]Check sensor!
[VFE]mclk on
[VFE CCI_0 ERR] Status error at addr_8bit = 78, wr_flag = 1, val = 3efadcf0
[VFE CCI_0 ERR] Status error at addr_8bit = 78, wr_flag = 1, val = 3efa00f0
[VFE CCI_0 ERR] Status error at addr_8bit = 78, wr_flag = 1, val = 3efa00f0
gc2035 sensor read retry=2
[CSI_ERR][GC2035]sensor_read err at sensor_detect!
[CSI_ERR][GC2035]chip found is not an target chip.
[VFE]mclk off
[VFE]vfe sensor subdev unregister!
[VFE]Sub device register "gc2035" failed!
[VFE_ERR]vfe sensor register check error at input_num = 0
[VFE]V4L2 device registered as (null)
[VFE]vfe_runtime_suspend
[VFE]..........................vfe clk close!.......................
[VFE]probe_work_handle end!
sunxi_keyboard_startup: keyboard has no clk.
input: sunxi-keyboard as /devices/virtual/input/input1
node ir_addr_code16 get failed!
sunxi_ir_startup: cir get supply err
Registered IR keymap rc_map_sunxi
input: sunxi-ir as /devices/soc.0/1f02000.s_cir/rc/rc0/input2
rc0: sunxi-ir as /devices/soc.0/1f02000.s_cir/rc/rc0
input: MCE IR Keyboard/Mouse (sunxi-rc-recv) as /devices/virtual/input/input3
FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
GPIO 102 valid
Current_V is : 1
MDIO bus name is 1c30000.eth
libphy: 1c30000.eth: probed
sunxi-gmac 1c30000.eth eth0: eth0: Type(6) PHY ID 001cc915 at 1 IRQ poll (1c30000.eth-0:01)
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
A link change request failed with some changes committed already. Interface eth0 may have been left with an inconsistent configuration, please check.
[DISP] disp_ioctl,line:1761:para err in disp_ioctl, cmd = 0x0,screen id = 65536
systemd-journald[1061]: File /var/log/journal/9d294af102ac4a1295e6d22577418a0b/user-1001.journal corrupted or uncleanly shut down, renaming and replacing.
systemd-journald[1061]: Failed to set ACL on /var/log/journal/9d294af102ac4a1295e6d22577418a0b/user-1001.journal, ignoring: Operation not supported
libphy: 1c30000.eth-0:01 - Link is Up - 1000/Full
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
hdmi_clk_disable_prepare()L176
nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.